agopian

Walimex pro Trigger W1 TTL T-C

85,00

Κωδικός : 21701

  • Wireless 2.4 GHz radio remote trigger, control for Walimex pro Flash2Go studio battery-powered flash and TTL Light Shooter up to a distance of 100 m
  • Supports TTL automatic flash, flash exposure bracketing, high speed sync, rear curtain sync
  • Remote control of all important flash functions such as output and flash mode (mode: manual, multi, TTL), modelling light, up to 5 groups and 32 channels
  • For Canon DSLR cameras, compatible with, among others, 1Dx, 5D, 6D, 7D, 30D, 40D, 50D, 60D, 70D, 100D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 750D, 760D, 1000D, 1100D, 1200D.
  • W1 TTL radio remote control with large clear display and easy operation; requires 2 x AA batteries � not included

Διαθέσιμο κατόπιν παραγγελίας

Κωδικός προϊόντος: 21701 Κατηγορία:

Περιγραφή

Reliable control and super-fast trigger
The W1 TTL radio remote control is designed for Canon cameras with a TTL function. You can control flashes that have an inbuilt Walimex pro W1 receiver system (e.g. Light Shooter 360 TTL, Flash2Go 600 TTL) directly by radio (2.4 GHz). The camera with a W1 radio trigger on it controls the exposure automatically in TTL mode without having to make manual adjustments. With the Walimex pro W1 TTL radio trigger, data is sent extremely quickly to the flash or several flashes, and they are adjusted accordingly and triggered with minimal delay. The maximum sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). If you want somewhat different exposure in TTL mode, the exposure can be adjusted up or down manually by three aperture stops (in third stages). Flash exposure bracketing is also possible. Based on the TTL values, an underexposed, a normally exposed and an overexposed image is created, from which the most suitable can be selected. The W1 TTL T-S radio trigger can control up to 6 flash groups at the same time (with one or several flashes).

Fully automatic or manual settings
Instead of fully automatic TTL exposure, you can control the flash output individually via the W1 radio control. Each flash or flash group can be controlled individually so that even difficult-to-access flashes can be adjusted during the shoot. The radio control supports both manual mode and multi mode (stroboscope function). All relevant parameters such as the number of flashes, frequency and output can be adjusted via the remote control. The maximum supported sync time is 1/8,000 seconds (achievable at a maximum exposure time of the camera of 1/8,000 seconds). Exposure with corresponding front and rear curtain sync shutter speeds can be set.

Intuitive to operate
The radio trigger requires 2 normal AA batteries (not included). A clear display makes it easy to adjust the important parameters. The settings can be made easily and for the most part intuitively. A comprehensive instruction manual (German and English) will help with tricky photo shoots.

Tested camera models
The radio trigger works with the following tested Canon DSLR cameras: 1Dx Mark II, 1Dx, 5Ds/5Dsr, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 6D, 7D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 100D, 700D, 650D, 600D, 550D, 500D, 450D, 400D DIGITAL(EOS Kiss Digital X), 350D DIGITAL, 1200D, 1100D, 1000D. If your model is not listed, we recommend a self-test and possibly upgrading your USB-firmware.

technical description

W1 TTL T-C
compatible cameras Canon EOS cameras (E-TTL II Auto Flash)
supports cameras with PC-sync-connection
built-in remote transmission system radio 2.4 GHz
modulation operation MSK
power supply 2*AA-batteries
exposure
mnual adjustment yes yes
TTL auto flash E-TTL TTL
multiple flash yes
TTL
high-speed synchronization yes
flash exposure compensation yes, � 3 in 1/3 increments
flash exposure lock yes
focusing light beam switch on manually
sync. 2. shutter curtain yes (setting on the camera)
wireless flash
wireless function in TTL mode, flash ratio not adjustable
in M mode, flash ratio (A: B C)
support of flash groups, group A – E
can be set individually
controllable slave group normal 3 (A, B, C)
extendet 5 (A, B, C, D, E)
transmission range (approx.) up to 100 m
channels 32
other aspects
adjusting the synchronization delay yes (0 ~ 10 ms, unit 100 �s)
acoustic signal ON/OFF
ZOOM-setting Control the zoom setting of the flash over
the transmitter
output interface transmitter: connect to input and output via
PC-cable
firmware-upgrade update via micro USB port
mermory function settings are saved for 2 seconds after the
last operation and restored after a reboot
dimensions/weight 72x75x52 (mm) / 90 g

Τεχνικά Χαρακτηριστικά :

General information

Product Type flash radio trigger
Length 72mm
Height 52mm
Width 75mm
Weight 90g

Specifications

Range 10.000cm
Transfer Funk
Power Supply 2x AA batteries or Ni-MH batteries
Frequency Channels 32

Packaging

Girth 385mm
Height of Packaging 110mm
Length of Packaging 110mm
Weight incl. Packaging 140g
Width of Packaging 55mm

Περιλαμβάνει :

  • 1� Walimex pro W1 TTL T-C trigger (batteries not included)
  • 1� comprehensive instruction manual (German/English)

Επιπρόσθετες Πληροφορίες

Βάρος 0.14 kg
Διαστάσεις 11 × 5.5 × 11 cm
Brand

Καλάθι

Κατάστημα

Εγγραφή στο ago news

* indicates required