Walimex pro Ceiling-mounted Lamp Support 34-54cm


Κωδικός : 16444

  • Stand for fixed mounting on ceiling
  • Extendable from approx. 34 to 54cm
  • For fixed mounting of continuous light, flash or other equipment
  • Ideal for limited space, e.g. in small studios or passport photo corners
  • Particularly practical: 5/8 Spigot variable usable (vertical, hanging and lateral)
  • Capable of bearing loads up to approx. 6kg

Διαθέσιμο κατόπιν παραγγελίας

Κωδικός προϊόντος: 16444 Κατηγορία:


Ideal for small rooms and permanent installation
For studios in which some setups are often or constantly used, the permanent installation of a stand is a good idea. A ceiling stand like this one is also particularly suitable for cramped conditions, as no protruding tripod legs take up space on the floor.

Nevertheless flexibly applicable
The tripod has a load capacity of up to approx. 6 kg. You can extend the 2 cm thick rod between 34 and 54 cm. The 5/8 spigot is equipped on one side with a 1/4 and on the other with a 3/8 inch thread connection. It can be mounted upright, suspended or sideways. This gives you a lot of flexibility when setting up.

Stable wall mounting
The scope of delivery includes four heavy-duty anchors for concrete as well as suitable fastening screws. The high load-bearing capacity of the stand and the relatively large levers create strong forces at the base. Therefore, make sure that your wall is suitable for such loads. Brick walls, for example, are either not suitable for such forces or must be prepared with chemical or liquid anchors. Therefore, please inform yourself before the assembly in the building retail trade. The same applies to the tensile load during ceiling installation. The mounting plate of the stand has two differently sized holes in each of the four corners. Thus different mounting options are available.

Τεχνικά Χαρακτηριστικά :

General information

Product Type Wall lamp holder
Material Aluminium
Product Color Black


Min. Length 340cm
Max. Length 540cm
Max. Load Tripod 6000g
Pack Measure 35cm
Fastening Tripod Connection Adapter Variable closure system
Connection 5/8 Spigot, 1/4 Inch with thread connection
Weight tripod 750g
Tripod Excerpts 2St.
Extensible Yes
Number of Tripod Segments extendible 1
Diameter 1st Tripod Segment (from below) 23mm
Diameter 2nd Tripod Segment (from below)Diameter 2nd Tripod Segment (from below) 19mm
Transportation Bag, Tripod included No
Type Lamp tripod
Material middle column Aluminium


Girth 570mm
Height of Packaging 90mm
Length of Packaging 349mm
Packaging Material Carton
Packaging with Euro Hole No
Weight incl. Packaging 935g
Width of Packaging 150mm

Περιλαμβάνει :

  • 1x Walimex pro ceiling tripod, 54cm
  • 1x Double spigot with 1/4 and 3/8 inch thread connection
  • Fastening material

Επιπρόσθετες Πληροφορίες

Βάρος 0.935 kg
Διαστάσεις 34.9 × 15 × 9 cm



Εγγραφή στο ago news

* indicates required